Conductivity/TDS/°C Analyzer

Model : ConCal+ | Make : ANALAB | HSN Code : 90278990

Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Instruction & Operational Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Technical Specification

• Conductivity Range : 0-20.00, 20-200.0, 200-2000 µS/cm, 2-20.000, 20-200 mS/cm
• Conductivity Resolution : 0.001, 0.01, 0.1 µS/cm & 0.001, 0.01, 0.1 mS/cm
• TDS Range : 0 to 10, 100, 1000, 10000, 100000 ppm
• TDS Resolution : 0.001, 0.01, 0.1 ppm & 0.001, 0.01 ppt (1ppt=1000ppm)
• Temperature Range : 0.0 to 130.0°C
• Temperature Resolution : 0.1°C
• Temperature Compensation : Auto / Manual
• Temperature Coefficient : 0-10.000 % per °C (Adjustable)
• Temperature Calibration : In-built software and can be calibrated by users
• Number of Range : One
• Calibration Standard : One
• Calibration Factor : One
• Suitable Cell Constant : 1.0 K
• Adjustable Cell Constant : 0.90 to 1.1 K
• Conductivity to TDS Conversion : 0.40000 to 1.00000 (Adjustable Factor)
• Reading : Conductivity at actual temperature and at 25°C and TDS with scrolling Display.
• Error Messages : “Wrong Standard / Cell”, “Cell Short”, “Cell Open”, “Try Upper Range”, “Try Lower Range” & “Temperature Probe Error”.
• Display : 16 x 2 Line Alphanumeric Backlit LCD.
• Keypad : Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS.
• Calibration Data Storage : Non-Volatile Memory which can store & view calibration cell constant, calibration range, standard conductivity solution, measured conductivity at 25°C, actual temperature, calibration factor etc.
• Power Supply : DC Adaptor