Auto Titrator - 7" Touch Screen & GLP Printing Format. Titration Analysis: Potential, Conductometric, Dead-Stop, Photometric and Thermometric Titration Analysis. Titration Method: DET, MET, SET, Constant pH, MAT with 1st & 2nd Derivative Method

Model : µTitraCal75+ | Make : ANALAB | HSN Code : 90278990

Supply with 10ml Burette, Combination Glass Electrode, Temperature Probe, Standard Buffer Tablets (7.00 pH, 4.01 pH & 9.18 pH), Power Code, Operational & Instruction Manual with SOP, Calibration Test Certificate and Warranty Card.

Standards Features:
• Interchangeable burette for high accuracy 5ml / 10ml / 20ml.
• Burette driver available optionally, support for dosing or titration.
• Burette line using acid and alkali resistance, perchloric acid resistance, organic reagent corrosion resistant material, can be non-aqueous titration.
• Support mixer upper and lower.
• Titration Method: Acid-base titration, non-aqueous phase acid-base titration, REDOX titration, precipitation titration and complex titration and other titration methods.
• Displays the test method, titration curve and measurement results in real time.
• Formula editor can display calculation results directly.
• Supports recalculation of original data.
• Potential Module: DET (dynamic equivalence point titration), MET (monotone equivalence point titration), SET (Preset Endpoint Titration), constant pH titration, constant speed titration, Blank titration, and MAT (manual titration). Supports endpoint detection by derivative methods (first and second derivative).
• Conductometric Module: MET (monotone equivalence point titration). Supports endpoint detection by derivative and segment methods.
• Dead-Stop Module: SET (Preset Endpoint Titration).
• Photometric Module: DET (dynamic equivalence point titration), MET (monotone equivalence point titration). Supports endpoint detection by derivative and segment methods.
• Thermometric Module: constant speed titration.

Technical Specification

• Display : 7” Colour High contrast touchscreen LCD
• Measurement : pH, pX, ion concentration and conductivity measurement
• System Features : User management, method management, sensor management, titrant management, data management and GMP management.
• Users management : Four-level authority management and password management.
• Method : Method management function, built-in titration method and measurement method, support custom method.
• Auto Sampler Connection : Available Optionally to realize the automatic measurement and batch detection of samples.
• pH
  pH Calibration : Up to 3 points calibration with buffer Recognition.
  Buffer Standard : NIST, DIN, EURO
  Electrode Diagnosis : Automatic with pH slope and offset display.
• Conductivity
  Calibration : Up to 3 points calibration with Standard Recognition.
  Temperature compensation : Linear at 20°C or 25°C and coefficient is configurable.
• Ion
  Calibration : Up to 3 points calibration.
  Measurement unit : μg/L, mg/L, g/L, mmol/L, pX, ppm and ppb.
  Measurement modes : Direct Reading mode, Standard Addition mode, and GRAN mode.
  Methods : 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+, etc. and also supported user-defined method.
• Burette Accuracy
  5ml Burette : ±0.010ml
  10ml Burette : ±0.020ml (Standard Supply)
  20ml Burette : ±0.030ml
  Resolution : 1/480000
• Potentiometric titration module
  Titration Repeatability : ≤0.2%
  Range
  pH: -5.000 to 20.000 pH
  mV: -2000.00 to 2000.00 mV
  pX: -2.000 to 20.000 pX
  Ion: 1.000x10-9 to 9.999x10+9 μg/L, mg/L, g/L, mol/L, mmol/L, ppm, ppb
  Resolution
  pH: 0.001 pH
  mV: 0.01 mV
  pX: 0.001 pX
  Ion: Up to 4 significant digits
  Accuracy
  pH: ±0.002 pH
  mV: ±0.03% or ±0.2 mV
  pX: ±0.002 pX (pX1), ± 0.005 pX (pX2)
  Ion: ±0.3%
  Fluctuation : ±0.3 mV/3h
  Repeatability : ≤0.1 mV
• Conductometric titration module
  Titration Repeatability : ≤0.2%
  Range and Resolution
  0.000µS/cm to 1.999µS/cm, 0.001µS/cm
  2.00µS/cm to 19.99µS/cm, 0.01µS/cm
  20.0µS/cm to 199.9µS/cm, 0.1µS/cm
  200µS/cm to 1999µS/cm, 1µS/cm
  2.00mS/cm to 19.99mS/cm, 0.01mS/cm
  20.0mS/cm to 199.9mS/cm, 0.1mS/cm
  200mS/cm to 2000mS/cm, 1mS/cm
  Electronic Accuracy : ±0.5% Full Scale
  Accuracy : ±0.5% Full Scale
  Fluctuation : ±0.33% Full Scale/3h
  Repeatability : ≤0.3% Full Scale
• Dead-Stop titration module
  Titration Repeatability : ≤0.2%
  Range : 0 to 0.199μA, 0 to 1.999μA, 0 to 19.99μA, 0 to 199.9μA
  Polarization current detection Accuracy: ±2% Full Scale
  Polarization voltage Accuracy : ±2mV
• Photometric titration module
  Titration Repeatability : ≤0.2%
  Range and Resolution : 0.00 to 1500.00 mV，0.01mV
  Wavelength : 470nm, 520nm, 570nm, 620nm, 650nm
  Wavelength Accuracy : ±10nm
• Thermometric titration module
  Titration Repeatability : ≤0.7%
  Range and Resolution : 0.0000 to 60.0000 °C，0.0001 °C
  Electronic Accuracy : ≤0.001 °C
  Serial Printer : 40 / 80 Column Dot matrix printer (To be procured optionally)
• Temperature
  Range : -10.0 to 135.0 °C
  Resolution : 0.1 °C
  Accuracy : ±0.1 °C
• General
  Power Supply : VAC 80-250V, 47-63Hz
  Dimensions : 240 × 360 × 400 mm
  Net Weight : 4 kg