
|
Supplied with 250ml Reaction Vessel, Dual Platinum Electrode,
Teflon Paddle Teflon Assembly , Moisture Trap for Reaction Vessel
& 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos),
Teflon Tubing for Dispensing Path, Operational & Instruction Manual,
Manufacturer Test Certificate and Warranty Card.
Technical Specification :
- Method of Detection : Conductometric
- Backlit LCD Display : 20 x 4 Line Alphanumeric
- Range of Moisture Detection : less than 20 PPM to 100%
- Display of Reading : Direct Reading of Moisture in PPM, Percentage(%) & mg/ml of water
- Dispenser : Motorized Dispensing for low and accurate measurement of reagent.
- Electrode : Dual Platinum Electrode.
- Stirring Time : 00:00 to 99:00 ( Minutes : Second ) - Users Adjustable
- End Point Time : 1-99 Seconds , Users Adjustable
- End Point Sensitivity of Moisture Detection : Users Adjustable
- Calibration Reminder Alarm : 0-99 hours
- Data Storage : More than 10 Analysis data with corresponding calibration data.
- Interface : Parallel Port for Dot-matrix Printer attachment.
- Input : Electrode Connector
- Power supply : 230 VAC ±10%, 50 Hz
Salient Features :
- Metalic Epoxy Based Powder Coated Body
- Parallel Port to connect 80 column Dot-matrix Printer
- Report Formation as per GLP Compliance
- Built in Magnetic Stirrer with soft touch Key Speed Controller
- Automatic end point detection with Audio Alarm
- OVER TITER Audio Alarm save KF Reagent
- Automatic Calculation of Avg. Factor and Maxi. 10 KF Factor can be stored in memory
- Auto Neutralization reduces the time between analysis & Gives accurate Results
- Onsite Dispenser Calibration/Validation Facility
- MOC of Dispenser is SS/ABS/TEFLON for Corrosion Protection & Maintenance free Operation
- In-Built Flushing System for cleaning dispensing path
Optional :
- Auto Drain of Reaction Vessel
- RS-232 to USB Interface with Cable & Driver software to Transfer Data from Inst. to PC
- GMP model
Analysis Report :
- Report Date & Time : 12-FEB-2010 – 16:09
- Company Name: ANALAB (VADODARA)
- Calibration Date & Time : 11-FEB-2010 – 23.34
- Calibration Method : Water by Volume
- Average Titer Factor : 6.666666
- Analysis Date & Time : 12-FEB-2010 – 16.00
- Sample Type & Method : Liquid by Volume
- Volume of Sample (ml.) : 05.000
- Density of Sample : 0.789
- Stirring Time (Min:Sec) : 00:00
- End Point Time (Seconds) : 20
- End Point (ml.) : 01.41
- Moisture %: 000.2382
- Moisture (PPM) : 0002382.0
- H2O (mg/ml) : 002797.87
|
Calibration Report :
- Report Date & Time : 03-FEB-2010 – 17:04
- Company Name : ANALAB (VADODARA)
- Calibration Date & Time : 03-FEB-2010 – 15.22
- Calibration Method : Water by Volume
- Stirring Time (Seconds) : 00
|
Sr. No. |
Volume(microlitre) |
End Point(ml.) |
TF Value |
01 |
10 |
01.99 |
5.025125 |
02 |
10 |
01.81 |
5.524862 |
03 |
10 |
01.81 |
5.524862 |
04 |
-N/A-- |
|
|
05 |
10 |
01.81 |
5.524862 |
06 |
10 |
01.81 |
5.524862 |
07 |
--N/A-- |
|
|
08 |
--N/A-- |
|
|
09 |
--N/A-- |
|
|
10 |
--N/A-- |
|
|
Average Titer Factor |
5.524862 |
|